Epson Embedded App

Overview

This section provides technical instructions specific to integrating Umango with Epson MFP devices. Although the Umango app will deploy automatically with Epson devices, you will need to manually prepare the device and ensure the Epson Open Platform is enabled first.

Enabling The Epson Open Platform

To enable the Epson Open Platform functions on a device, activation must be performed using an Epson Product Key that is generated based on the Serial Number of the device. You can see the Serial Number on the product label that is placed on the back side or lateral side of the Device or on the Device’s warranty card.

To obtain the Product Key of each Device, please access the license issuance site below or ask your contact of Epson Open Platform ISV Support.

https://openplatform.epson.biz/license-op/inputInformation.html

Steps to Activate and Manage the Epson Open Platform Functions

Preparation

Before starting the activation process, you must obtain a valid Product Key from SEC. Ensure you have this key ready, as it is required to proceed.

Entering the Product Key

To activate the Epson Open Platform functions, you need to enter the Product Key into the device. Activation page in WebConfig: Access the activation page and input the Product Key.

Confirming Activation

    1. After entering the Product Key, you can verify whether the activation was successful. This can be checked via the following methods:
    2. WebConfig: Check the activation status in the WebConfig settings.
    3. Panel Menu: Use the device's panel menu to confirm the activation status.
    4. Printer Status Sheet: Print the status sheet to view the Product Key value.
    5. If activation is complete, the Product Key value will be displayed.